SUBSCRIBE TO THE
MAGAZINE NOW
Facebook-f Instagram

Ian Callum’s superb Mark 2 gets limited production run

13 February, 2015

Late last year, Jaguar’s Design Director, Ian Callum, unveiled his own, completed, project car — a stunning resto-modded Mark 2 Jag. Callum designed the car, which was built by Classic Motor Cars (CMC) in Shropshire, England, over an 18-month time period.

The Mark 2 is powered by Jaguar XK’s modified and uprated 4.3-litre engine mated to a five-speed manual gearbox. The car sits on unique, independent rear-suspension, modernized front suspension, power-assisted rack and pinion steering, and uprated front brakes — the whole design was for a practical, reliable, and extremely exciting daily driver.

Functional louvres adorn the Mark 2’s front guards, the bumpers have been redesigned, and the car sits 30mm lower than factory upon beautiful 17-inch split-rim multi-spoke wheels. Inside, the car boasts a modern entertainment system and red-leather interior resembling the very British smoking jacket.

Mere hours after the car’s unveiling, CMC were already fielding enquiries from people across the globe, asking if they too could buy one. Well, the build of the second of these special Mark 2s is underway as part of a limited run of 12 cars.

Nick Goldthorp, managing director of CMC, said, “It is going to be a left-hand-drive car, and the body is nearing completion. We should finish the vehicle by the end of this year.”

Each car will be specifically tailored to the individual buyer, who will finalize the specification with Ian Callum.

“No two cars will be the same, which makes them more unique. It’s all in the small details that can be tailored, including the gearbox, exterior and interior colours,” said Goldthorp.

With the car currently under construction expected to visit the USA next year, we’ll be keeping a close eye out on its progress and bring you more as it happens.

 

Last Tango in the Fast Lane

30 April, 2026

In the mid ’80s, I locked into a serious Nissan/Datsun performance obsession. It could have kicked off with my ’82 Datsun Sunny, though this would have been a bit of a stretch of the imagination, given its normally aspirated 1.2-litre motor — not the sort of thing to unleash radical road warrior dreams. But it did plant a seed, and it was a sweet little machine and surprisingly quick, in contrast to all the diabolical English offerings I had endured.
I was living in South Auckland at the time and was an unrepentant petrolhead. Motor racing was my drug of choice, and I followed the scene slavishly. Saloon car racing, with the arrival of the international Group A formula, was having a serious renaissance here and in Australia and Europe. There was suddenly an exotic air in local racing that had been absent for 15 years.
I was transfixed by this new frontier of motor racing that had hit our tracks in 1985–87 and the new array of machinery on display. In 1986, the Nissan Skyline RS DR30 made a blinding impression on me. The Australian Fred Gibson-run, Peter Jackson-sponsored team of George Fury and Glenn Seton were the fastest crew of the 1986 Australian Touring Car Championship. But Kiwi legend Robbie Francevic snuck through to win the Aussie Championship in his Volvo 240T after a strong start and consistent finishes.

NZ Classic Car magazine, May/June 2026 issue 405, on sale now

26 April, 2026

Reincarnation of the snake
We are captivated by a top-quality sports car
The Shelby NZ build team at Matamata Panelworks has endured a long and challenging journey, culminating with the highly anticipated public unveiling of the 427SC and firing up of its sonorous V8 at the 2026 Ayrburn Classic Festival of Motoring in Queenstown on February 20. This is a New Zealand-built car with loads of character and potential.
The car is now back in Matamata, and I finally have an opportunity to get up close and personal with it. But before then, the question that must be asked is, “Why would ya?”
The first answer is easy, as mentioned in the last issue of New Zealand Classic Car (#404). It was a great way to use up all the surplus Mustang parts acquired while converting brand-new Mustangs into Shelbys. The unused new Mustang parts would be great in any kit car, but the 427SC in front of me cannot be classified as one.
This is not a kit car. The reality is that it is a high-quality, factory-made production car.
Possibly the second answer is because the CEO of Matamata Panelworks, Malcolm Sankey, wanted to build a replica of the car that is a distant relation to the Shelby Mustangs scattered around his showroom floor, a car created long before the first Mustang was even thought of, and the brainchild of Carroll Shelby back in the early ‘60s.