2017 Porsche 911 Carrera 4: First turbos, now all-wheel drive

12 October, 2015

 

We’re not sure an electro-hydraulically controlled all-wheel drive system is something Porsche purists want to hear is being added to the 2017 Porsche 911 Carrera 4 line-up, but once we saw the proposed engine specs and acceleration times, we were convinced.

Porsche has announced that there will be two engine options when the Carrera 4 hits the tarmac in 2017, and they’re both three-litre flat-sixes, but with the addition of two turbochargers. How does 276kW (370hp) sound? Well, that’s just the base model — the S model produces a stonking 313kW (420hp) at the flywheel. The torque band has widened, thanks to the twin turbochargers, with 449Nm available from 1700rpm, right through to 5000rpm on the base model, and 499Nm available across the same rev range with the S model. It’s safe to say driveability has significantly increased.

To get the power down to the ground you can choose from either a seven-speed manual gearbox — yes seven-speed — or a dual-clutch transmission. Acceleration times are just ludicrous; 3.9 seconds to 60mph for the base model, and 3.6 seconds for the S model — that’s nearing supercar territory.

Your coupe, convertible, or Targa model will come factory with PASM (Porsche Active Suspension Management) suspension, and you’ll have the choice of adding the Sport Chrono package, which adds all sorts of fancy German wizardry. Four ‘modes’ make the Chrono package extra special; Normal, Sport, Sport Plus, and Individual modes alter the performance and handling of the Porsche — all at the touch of a button. If this wasn’t enough, Porsche has announced the addition of rear-axle steering, as seen in the current 911 Turbo models, and 911 GT3s.

The question is though, which model would you choose?

Polishing to perfection

The secret to a show-stopping finish is colour sanding, no matter which paint system you use. Even a good painter, no matter how experienced or talented — like my mate Bruce Haye, CEO at Ace Panel and Paint in Whitianga — can’t shoot to a perfect mirror finish. To get that level of perfection, you need to colour sand.
It used to be called ‘rubbing out’ or ‘cutting’, and it was done with pastes that came in cans. They worked — sort of — but the compounds really just rounded off imperfections instead of eliminating them, and they removed a lot of paint in the process. But now your new finish can be made flawless, thanks to microfine sandpapers that come in 1000, 1500, 2000, and even 2500 grit ranges, and Farecla G3 polish — available from automotive paint suppliers.

NZ Classic Car magazine, March/April 2026 issue 404, on sale now

BMW’s flagship techno showcase
The supermodel 1995 BMW 840Ci is simply elegant and perfectly engineered.
BMW’s 840 Ci flagship Coupe provides superb comfort and equipment packaged in a stylish body, with grand-touring performance and surprisingly competent handling for its size.
It’s the kind of machine that stands apart from the start. When BMW first unveiled its flagship Grand Tourer at the 1989 Frankfurt Motor Show, the automotive world blinked twice. Sleek, low, and impossibly modern for its era, it combined drama with a sort of purposeful understatement. This silhouette still looks striking today, long after its peers have faded into obscurity.
Initially offered with a range of engines, the model you’re reading about is the V8 iteration, featuring a 4.0-litre eight-cylinder heart under its long bonnet and a smooth five-speed automatic at the back. It wasn’t about blistering sprint times so much as effortless velocity. There was power on tap, sure, but the way it delivered thrust felt unhurried and measured – the automotive equivalent of a deep exhale on a long drive.
Poster 1964 Chevrolet Corvette Stingray, C2